Leave Your Message

PC Double Disc Wear-resistant Gate Valve(DDV) SZ-I Type

SZ-I double-disc wear-resistant gate valve uses double discs, double-sided seal, sealed with ceramic, and tungsten steel, with excellent mechanical and wear-resistant properties and hardness up to 60 ~ 90HRA. Such design solves the short life time issue due to sealing surface abrasion and erosion by continuous scouring material mixed with compressed air.

    Applications

    For thermal power plant fly ash handing system (as inlet valve, outlet valve, vent valve, exhaust valve, pipeline switching valve and discharging valve). Can also be used for mining, paper, chemical, pharmaceutical powder, and powder-air mixture or other abrasive media.

    characteristics

    ● Wear-resistance and long service life.

    ● Compact structure, easy installation.

    ● Seals can be replaced, cost savings.

    ● Good effect of high temperature applications. (Max 500 Cent degree)

    ● No barrier in inlet/outlet port, compressed air automatic blowing valve cavity, less fouling phenomenon.

    Principle of Operation

    When the compressed air enters from the upper intake port, the valve stem drives plate to movedownward, the valve closes. And air enters from the down intake port, stem drives plate to move upward, the valve opens. Spring is added between the plate and seat to ensure they always touch tightly, at the same time enable plates move gently vertically. Such design could compensate for thermal expansion and contraction of the valve parts, and can overcome any influence of fluctuating back pressure on the seal and prevent particulate medium  entering sealing surfaces. In the process of opening and closing, valve plates could self-rotate, as a result sealing surfaces could be grinded, and polished. Additionally, eddy current would be produced due to inlet/outlet channel is off centering to valve body, and such eddy would purge the valve cavity automatically. All these characteristics contributes to the superior long life time of valve, providing a reliable guarantee for your system.

    Product Parameters

    Parameter

    Value

    Nominal Diameter

    DN50-DN400

    Nominal Pressure

    1.0MPa

    Actuator Working Pressure

    0.4-0.6MPa

    Applicable Temperature

    ≤200℃(Max ≤450℃)

    Applicable Media

    Fly ash, ash and slag, dry dust, solid particles, and other abrasive and corrosive materials

    Structure

    Structure

    Type

    Diameter

    Dimensions

    SZ-I

     

    DN

    D

    D1

    b

    Z-φd

    L

    H

    FQGA

    50

    160

    125

    15

    4-φ18

    200-360 or Customed

    70

    80-65

    65

    180

    145

    15

    4-φ18

    70

    80-80

    80

    195

    160

    16

    4-φ18

    70

    100-95

    100

    215

    180

    16

    8-φ18

    70

    125-115

    125

    245

    210

    18

    8-φ18

    70

    125-140

    150

    280

    240

    18

    8-φ23

    70

    160-165

    175

    310

    270

    20

    8-φ23

    100

    160-195

    200

    335

    295

    20

    8-φ23

    100

    160-220

    225

    365

    325

    20

    8-φ23

    100

    200-240

    250

    395

    350

    23

    12-φ23

    100

    200-270

    300

    445

    400

    23

    12-φ23

    100

    200-320

    400

    565

    515

    27

    16-φ26

    100

    320-430

    Thank you for considering Long Jin as your potential partner in pneumatic conveying. Our history dates back to 2003 when we were founded as Wuxi Peng Cheng Pneumatic Valve Company. In 2008, we rebranded to Long Jin Machinery, marking a new chapter of growth and specialization. Strategically located in Wuxi, China – a well-known industrial belt for pneumatic and hydraulic systems – we have grown into a modern facility covering over 6,600 square meters, supported by a registered capital of 21 million RMB and more than 60 dedicated employees. Today, Long Jin is recognized as a rising and famous supplier of pneumatic conveying valves and equipment. But we are not resting on our past. We are constantly improving our designs, tightening our quality control, and listening more carefully to our customers. That is why we encourage you to send us an inquiry – whether you need a quick price check, a technical datasheet, a comparison between valve types, or a complete system quotation. Every inquiry is treated as the beginning of a relationship, not just a transaction. We promise a response that is detailed, respectful of your time, and focused on solving your actual problems. Do not hesitate to reach out. Send your inquiry to Long Jin today, and let us work together to make your pneumatic conveying system more efficient, reliable, and cost-effective.

    Make an Free Consultant

    Your Name*

    Phone Number

    Country

    Remarks*

    reset