Leave Your Message

PC Double Disc Anti-abrasion Gate Valve SC Type

SC Type double disc valves are also available in customized versions tailored to client requirements. These can be mainly classified into the following categories:

1. Valve Body Material: In addition to the standard materials such as QT450 and carbon steel, the material can be changed according to requirements to 304 stainless steel, 316L stainless steel, or cast steel.

2. Sealing Surface Material or Form: Certain demanding operating conditions require special sealing surfaces that offer enhanced wear resistance. For example, the valve disc can be made from a solid piece of alumina ceramic or zirconia ceramic. For applications requiring extreme wear resistance throughout, the valve flow channel can also be lined with ceramic tubes.

3. Valve Actuation or Matching with Specific Actuator Brands: Various drive modes can be provided, such as handwheel operation or electric actuator operation, including adaptability to specific pneumatic actuators such as SMC, ABB brands.

4. Other Customization Scenarios: This category covers any other customized requirements not listed above, tailored to specific client needs not addressed by the standard options.

    Applications & Characteristics

    1. Valve Body Material Customization
    In addition to conventional materials such as ductile iron (QT450) and carbon steel, we offer a variety of material options based on operating conditions:
    ● 304 Stainless Steel: Suitable for industries requiring cleanliness such as food and pharmaceuticals, or for handling mildly corrosive media
    ● 316L Stainless Steel: Excellent resistance to chloride ion corrosion, ideal for marine environments, chemical industry, and other highly corrosive conditions
    ● Cast Steel (WCB): Suitable for client specific situation.

    2. Sealing Surface Material and Form Customization
    For demanding conditions involving high wear and high erosion where conventional metal sealing surfaces cannot meet long-term requirements, we provide comprehensive wear-resistant solutions:
    ● Alumina Ceramic Valve Disc: Made from solid alumina ceramic with hardness reaching HRA75+, offering excellent wear resistance and high cost-performance ratio, particularly suitable for conveying high-hardness particulate materials such as alumina powder and coal powder
    ● Zirconia Ceramic Valve Disc: Made from solid zirconia ceramic, featuring not only high hardness but also better toughness and impact resistance, with high surface smoothness, suitable for applications with minor impacts and requiring smooth material flow
    ● Fully Lined Ceramic Flow Channel: Ceramic material is used not only for the valve disc but the entire flow channel inner wall (including valve body inner wall) is embedded with ceramic sleeves, achieving complete isolation between media and metal valve body, providing comprehensive extreme wear protection, particularly suitable for high-velocity particle flows, highly abrasive slurries, and other applications requiring extremely long valve service life

    3. Valve Actuation and Actuator Customization
    Based on site operating conditions and automation requirements, we offer various drive mode options:
    ● Handwheel Operation: Simple structure, reliable operation, suitable for on-site manual control scenarios
    ● Electric Actuator Operation: Enables remote control and automated operation, improving work efficiency
    ● Specific Brand Pneumatic Actuator Matching: Can be adapted to well-known brand pneumatic actuators such as SMC ,ABB and etc according to customer requirements, ensuring system compatibility and operational reliability

    4. Other Customer Customization Requirements
    In addition to the standard customization options mentioned above, we also accept other special customization requirements not listed, including but not limited to special connection methods, special sealing grades, special coating treatments, etc., to fully meet the application requirements of various complex operating conditions.

    Principle of Operation

    When the compressed air enters from the upper intake port, the valve stem drives plate to movedownward, the valve closes. And air enters from the down intake port, stem drives plate to move upward, the valve opens. Spring is added between the plate and seat to ensure they always touch tightly, at the same time enable plates move gently vertically. Such design could compensate for thermal expansion and contraction of the valve parts, and can overcome any influence of fluctuating back pressure on the seal and prevent particulate medium  entering sealing surfaces. In the process of opening and closing, valve plates could self-rotate, as a result sealing surfaces could be grinded, and polished. Additionally, eddy current would be produced due to inlet/outlet channel is off centering to valve body, and such eddy would purge the valve cavity automatically. All these characteristics contributes to the superior long life time of valve, providing a reliable guarantee for your system.

    Product Parameters

    Parameter

    Value

    Nominal Diameter

    DN50-DN400

    Nominal Pressure

    1.0MPa

    Actuator Working Pressure

    0.4-0.6MPa

    Applicable Temperature

    ≤200℃(Max ≤450℃)

    Applicable Media

    The materials in the specific area must be dry and have good flowability

    Long Jin’s wear-resistant ceramic valves have proven their durability in some of the most challenging pneumatic conveying environments, including high-temperature ash handling in power plants and abrasive material transfer in metallurgical facilities. However, we also understand that no two conveying systems are exactly alike. The specific combination of particle size, conveying velocity, pressure differential, and pipe routing can significantly impact valve performance and service life. That’s why we don’t believe in one-size-fits-all solutions. To help us recommend the most suitable ceramic valve configuration for your unique application, please take a moment to complete the inquiry form below. Share with us details such as your conveying medium, operating temperature, expected cycles per day, and any past wear issues you’ve encountered. Once received, our application engineers will review your parameters and respond with a tailored proposal, including valve sizing, material grade suggestions, and estimated service intervals. Your operational challenges deserve a precise answer—not a generic catalog page.

    Make an Free Consultant

    Your Name*

    Phone Number

    Country

    Remarks*

    reset