Efficient Gasification Equipment and Grooves from China Suppliers - Factory Solutions for Smooth Material Flow
Characteristics
Tank is formed via compression molding process, guaranteeing not only beautiful appearance but no leak from body and junctions. Pre assemble, shaping adjustment process eliminates all welding deformation and stress, ensuring its bottom surface and flange connecting surface smooth and straight; The porous plate is a kind of high-strength gasification board designed for the power plant dry ash bank.
Detail Image
Product Parameters
| Parameter | Value |
|---|---|
| Material | SiC |
| Compressive Strength | 67.7 MPa |
| Bending Strength | 27.3 MPa |
| Density | 2.22 g/m³ |
| Permeability | 0.8 m³/m².min |
| Porosity | 37.9% |
| Gas Consumption | 0.17 Nm³/min |
| Temperature Tolerance | >400℃ |
| No. | Name | Type | Spec. (Width × Len × Thick) |
|---|---|---|---|
| 1 | Gasification Rectangular Plate | QHB150 | 150 × 300 × 25 |
| QHB175 | 175 × 305 × 25 | ||
| QHB200 | 200 × 305 × 28 | ||
| QHB250 | 250 × 310 × 30 | ||
| 2 | Gasification Round Plate | YQHB150 | φ 150 × 25 |
| YQHB175 | φ 175 × 25 | ||
| YQHB200 | φ 250 × 28 | ||
| YQHB250 | φ 250 × 30 | ||
| 3 | Gasification Groove | QHC150 | — |
| QHC175 | — | ||
| QHC200 | — | ||
| QHC250 | — |
Could be Customized
🔷 Gasification Groove
- Gasification grooves for flat bottom ash silo are arranged uniformly on the bottom.
- Tilt angle from ash silo edge to the discharge port no less than 6°.
- Layout area no less than 15% of area of the silo bottom.
- Gasification air per square meter of groove is 0.62 Nm³/min.m².
- Distance between two discharge holes should be no less than 1.8M; two chutes should be placed towards discharge holes along opposite slope.
- Air pressure of ash side of gasification groove preferably no more than 80 KPA.
- Air from each intake port should remain stable; each branch intake pipe should be equipped with automatic flow control valve.
- Manhole should be set near the bottom of the silo.
🔶 Gasification Plate
- Gasification plate generally set at cone bottom ash silo, hopper bottom.
- Generally close to the discharge port disposed at 2 plates, and 4 placed at the bottom of the cone.
Frequently Asked Questions
Q
What material is the gasification groove and porous plate made of?
The gasification groove and porous plate are made of SiC (Silicon Carbide), a high-strength material offering excellent compressive strength (67.7 MPa), bending strength (27.3 MPa), and temperature tolerance exceeding 400℃, making it ideal for power plant dry ash bank applications.
Q
How is the tank body manufactured to prevent leakage?
The tank is formed via a compression molding process, which guarantees a beautiful appearance and ensures no leakage from the body or junctions. A pre-assemble and shaping adjustment process eliminates all welding deformation and stress, keeping the bottom surface and flange connecting surface smooth and straight.
Q
What are the key installation requirements for gasification grooves in a flat bottom ash silo?
Gasification grooves must be arranged uniformly on the silo bottom. The tilt angle from the silo edge to the discharge port must be no less than 6°, and the layout area must cover at least 15% of the silo bottom area. The distance between two discharge holes should be no less than 1.8M.
Q
What is the recommended air pressure for the gasification groove system?
The air pressure on the ash side of the gasification groove should preferably be no more than 80 KPA. Additionally, each branch intake pipe should be equipped with an automatic flow control valve to ensure stable airflow from each intake port.
Q
Can the gasification plates and grooves be customized to specific dimensions?
Yes, customization is available. Standard sizes are offered for gasification rectangular plates (e.g., QHB150 to QHB250), gasification round plates (YQHB series), and gasification grooves (QHC series). Custom specifications can be arranged based on specific project requirements.
Q
How are gasification plates installed in a cone bottom ash silo?
Gasification plates are generally installed at the cone bottom ash silo or hopper bottom. The recommended configuration is 2 plates placed close to the discharge port and 4 plates positioned at the bottom of the cone to ensure effective and uniform gasification coverage.


