Leave Your Message

Efficient DMC Type Bag Filters from China Suppliers - Leading Dust Collection Factory Solutions

The DMC pulse bag filter is an efficient solution designed for the effective filtration of dust-laden gases, making it ideal for various powder handling applications. This filter is strategically positioned atop a wide range of powder banks to ensure optimal performance, When selecting the appropriate product type, it is crucial to consider the dust concentration at the inlet. Airflow through the filter bag, known as filtration velocity, is inversely related to the concentration of dust in the gas. Therefore, when determining the necessary filtration area, you must account for the dust collection capacity, which is the maximum allowable dust quantity per unit area on the bag between two cleaning cycles. Generally, the dust collection capacity should not exceed 400 g/m² and can be calculated using the formula: C=G*V*T, Where:, C = dust collection ability, G = inlet dust concentration, V = filtration velocity, T = cleaning interval, If the calculations indicate that the dust collection ability will be exceeded, adjustments should be made to either the filtration velocity or the filter area to maintain efficiency. As one of the leading suppliers and factories in China, we ensure our DMC pulse bag filters meet international standards for quality and performance

    Detail Image
    DMC Type Bag Filter (1)
    DMC Type Bag Filter (2)
    DMC Type Bag Filter (3)
    DMC Type Bag Filter (4)
    Outline and Dimensions
    Code name A B C D H G J L M N I L1 K K1 N-d N1-d1
    DMC24 1410 1450 360 470 2575 3/4" 440 339 1200 370 400 620 110 113 14-Φ11 24-Φ18
    DMC36 1360 1400 755 466 2575 3/4" 441 339 1000 366 400 800 147 113 12-Φ11 24-Φ18
    DMC48 1760 1800 955 890 2575 1 840 339 1200 370 800 1020 110 113 20-Φ10 32-Φ18
    DMC60 2160 2250 1200 866 2600 1 836 336 2000 366 800 1250 120 120 20-Φ11 36-Φ18
    DMC72 2614 2650 1400 870 2600 1 840 339 2400 370 800 1390 120 113 20-Φ11 40-Φ18
    DMC84 3014 3050 1600 1270 2600 1 1240 339 2800 370 1200 1590 120 113 26-Φ11 44-Φ18
    DMC96 3410 3450 1835 1270 2600 1 1240 339 3200 370 1200 1755 124 113 26-Φ11 48-Φ18
    DMC108 3850 3900 2035 1450 2600 1 1400 339 3600 370 1360 120 113 34-Φ11 52-Φ18
    DMC120 4260 4300 2225 1450 2600 1 1240 336 4000 370 1200 124 113 26-Φ11 56-Φ18
    Technical parameters model DMC-24 DMC-36 DMC-48 DMC-60 DMC-72 DMC-84 DMC-96 DMC-108 DMC-120
    Area(m²) 18 27 36 45 54 63 72 81 90
    No. of Bags 24 36 48 6 72 84 96 108 120
    Bag Size Φ120x2000
    Temp(℃) <120
    Pressure(Pa) 1000~1500
    Performance 99%
    Dust Concentration <15(g/m³)
    Filtration Velocity (m/min) 0.5~4
    Air Flow(m³/h) 540~
    4300
    810~
    6480
    1080~
    8640
    1350~
    10800
    1620~
    12900
    1890~
    15100
    2160~
    17200
    2430~
    19400
    2700~
    21600
    Blow Pressure(Mpa) 0.5~0.7
    No. of Meg. Valve(unit) 4 6 8 10 12 14 16 18 20
    Plus Length(m) 0.1~0.2
    Period(s) 60~120
    Interval(s) 1~50
    ⚠ Important Notice — Get the Right Valve for Your System
    Power plants rely on consistent, uninterrupted ash handling, and Long Jin's pneumatic valves have been installed in dozens of coal-fired and biomass facilities across China. However, every plant has unique boiler output, ash characteristics, and conveying line layouts. A valve that performs well in a low-velocity system may fail prematurely in a high-velocity dilute phase setup. To help you avoid costly trial and error, we encourage you to complete the inquiry form with as much detail as possible about your ash handling conditions. Please include your ash type (fly ash, bottom ash, or mixed), moisture content, temperature range, conveying phase (dense or dilute), and current valve failure modes if you are replacing an existing product. If available, share your system's air-to-material ratio and pipe diameter. Our specialists will cross-reference your data with our past project database and propose a valve model that balances wear resistance, sealing reliability, and lifecycle cost. Don't let another valve fail mid-cycle—let us engineer one that lasts. Fill out the form below to start the conversation.
    ?
    Frequently Asked Questions
    Q What is a DMC Type Bag Filter and how does it work?
    A The DMC Type Bag Filter is a pulse-jet dust collection system that uses cylindrical filter bags to capture airborne dust particles. Contaminated air enters the filter housing, passes through the filter bags, and clean air exits through the outlet. Periodically, compressed air pulses are released to dislodge accumulated dust from the bag surface, which then falls into a collection hopper below.
    Q What filtration efficiency does the DMC Bag Filter achieve?
    A The DMC Type Bag Filter achieves a filtration performance of up to 99%, making it highly effective for industrial dust control applications. The outlet dust concentration is maintained below 15 g/m³, meeting stringent environmental and workplace safety standards.
    Q What is the maximum operating temperature for the DMC Bag Filter?
    A The DMC Bag Filter is designed to operate at temperatures below 120°C. For applications involving higher temperature gases, additional pre-cooling or insulation measures may be required. Please consult our technical team if your process exceeds this temperature range.
    Q How do I select the right DMC model for my application?
    A Model selection depends on your required air flow volume (m³/h), dust type and concentration, operating temperature, and available compressed air pressure. The DMC series ranges from DMC-24 (18 m² filter area, 540–4,300 m³/h airflow) to DMC-120 (90 m² filter area, 2,700–21,600 m³/h airflow). Providing your process parameters allows our engineers to recommend the most suitable model.
    Q What compressed air pressure is required to operate the pulse-jet cleaning system?
    A The pulse-jet cleaning system requires a blow pressure of 0.5 to 0.7 MPa. The pulse interval is adjustable from 1 to 50 seconds, and the cleaning period can be set between 60 and 120 seconds, allowing flexible operation based on dust load conditions.
    Q Can the DMC Bag Filter be used for fly ash and bottom ash applications in power plants?
    A Yes, the DMC Bag Filter is well-suited for power plant ash handling applications including fly ash, bottom ash, and mixed ash types. For optimal valve and filter selection, please provide details such as ash type, moisture content, temperature range, conveying phase (dense or dilute), and pipe diameter so our specialists can recommend the best configuration for your system.

    Make an Free Consultant

    Your Name*

    Phone Number

    Country

    Remarks*

    reset