Dense Phase Transporting Pump
LD positive pressure dense phase pump process could be dividedinto four stages.
FilI
Vessel at atmospheric pressure. Inlet and vent valves open toallow material to fill in. Inlet and vent valves are closed whendesired weight or level of material is reached.Fluidization and Pressurization
Intake valve automatically open, the compressed air is rapidlyintroduced to the bottom of the vessel, diffusing through theporous media to fluidize the material, meanwhile the pressure riseinthevessel.
Conveying
When the vessel pressure reaches predefined threshold, theoutlet valve opens. Transporting begins, with fluidizingstrengthening, and material gradually reducing. During the wholeprocess, material is fluidizing and conveying simultaneously.Depressurization/ Purge Convey LineWhen vessel is empty, and pressure drops to pipe resistance, theconveying continues for a while to purge the pipeline. Then the airintake valve is closed, and outlet valve is closed after a while. Aconveying cycle completes.
FilI
Vessel at atmospheric pressure. Inlet and vent valves open toallow material to fill in. Inlet and vent valves are closed whendesired weight or level of material is reached.Fluidization and Pressurization
Intake valve automatically open, the compressed air is rapidlyintroduced to the bottom of the vessel, diffusing through theporous media to fluidize the material, meanwhile the pressure riseinthevessel.
Conveying
When the vessel pressure reaches predefined threshold, theoutlet valve opens. Transporting begins, with fluidizingstrengthening, and material gradually reducing. During the wholeprocess, material is fluidizing and conveying simultaneously.Depressurization/ Purge Convey LineWhen vessel is empty, and pressure drops to pipe resistance, theconveying continues for a while to purge the pipeline. Then the airintake valve is closed, and outlet valve is closed after a while. Aconveying cycle completes.
010203









