Q
What is the difference between the KC and KD silo unloader models?
A
The KC series is a side unloader designed for lateral discharge from silo walls, while the KD series is a bottom unloader installed at the base of the silo. Both are available in 100mm and 150mm discharge port diameters, but the KD models offer a higher discharge capacity range of 60–120 t/h compared to the KC series.
Q
What materials can the KD/KC silo unloaders handle?
A
These unloaders are primarily designed for dry, powdery bulk materials such as cement, fly ash, alumina, and similar pneumatically conveyable substances. The air consumption specification of 0.8–1.2 m³/h is referenced for cement as a standard medium.
Q
What air supply pressure is required to operate these unloaders?
A
The cylinder working pressure ranges from 0.24 to 0.58 MPa, while both the air inflation box and air inflation rod require a working pressure of 0.1 to 0.2 MPa. A stable compressed air supply within these ranges is essential for reliable and efficient operation.
Q
How do I select the correct model size for my silo system?
A
Model selection depends on your required discharge capacity, silo outlet flange dimensions, and installation type (bottom or side). Refer to the dimensional tables for flange bolt circle diameters (d1, d2, d3) and overall dimensions (A, B, C, etc.) to match your existing silo connection. Our application engineers can assist with a precise recommendation based on your specific parameters.
Q
Can these unloaders be used in high-temperature or abrasive environments?
A
Yes. Long Jin's wear-resistant ceramic valve technology integrated into these unloaders has been validated in demanding environments such as high-temperature ash handling in power plants and abrasive material transfer in metallurgical facilities. For extreme conditions, please provide your operating temperature and material characteristics so we can confirm the appropriate material grade.
Q
How can I get a customized solution or technical proposal?
A
Please submit an inquiry with details including your conveying medium, operating temperature, expected discharge cycles per day, and any wear-related issues previously encountered. Our application engineers will review your requirements and provide a tailored proposal covering valve sizing, material grade recommendations, and estimated service intervals.