Leave Your Message

China Suppliers Factory DRC Type Rotary Disc Wear-resistance Valve for Enhanced Flow and Durability

Introducing our DRC-type disc valve, a superior choice for efficient material flow management, particularly suited for materials with lower flowability. Unlike the DX-type rotary valve, our DRC valve comes with a larger valve chamber, minimizing the risk of clogging. As one of the leading China suppliers, we ensure that our valves are designed with a robust sealing mechanism, featuring an elastic self-compensating seal and a through-type rotating shaft design for enhanced durability and support, Maintenance is a breeze with built-in handholes that allow easy access for regular inspections and clog removals. The operational motion of the plates is expertly managed by a pivot axis, converting the valve's opening and closing actions into smooth rotational movement. This innovative design ensures that the pneumatic actuator's piston rod remains protected from direct contact with corrosive media, thus prolonging the life of the actuator, Our DRC disc valve also incorporates high-quality sealing materials, including ceramic and tungsten steel, known for their exceptional mechanical properties and wear resistance, with hardness ratings reaching 60 to 90 HRC. This advanced design addresses common issues regarding short lifespans due to sealing surface wear and erosion from abrasive materials mixed with compressed air. Trust the expertise of our factory in China for reliable valve solutions that enhance your operations

    Applications

    For thermal power plant fly ash handing system (as inlet valve, outlet valve, vent valve, exhaust valve, the pipeline switching valve and discharging valve). Can also be used for mining, paper, chemical, pharmaceutical and other types of conveying dry dust, dust-air mixture or other abrasive media.

    β˜…Enhanced Feature: It is particularly suitable for working conditions where the material flowability is relatively poor, such as materials with a certain degree of water absorption, like limestone, or in dry or semi-dry desulfurization ash applications, offering better adaptability.

    β˜…Enhanced Feature: Provide maintenance handholes to facilitate regular valve inspection or unclogging of blockages.


    Characteristics

    πŸ›‘οΈ
    Wear-resistance and long service life.
    βš™οΈ
    Compact structure, easy installation.
    πŸ”§
    Seals can be replaced, cost saving.
    πŸ”©
    Actuator's piston rod is not directly contact with the media, extending the life of the actuator.
    πŸ’¨
    No barrier in inlet/outlet port, compressed air automatic blowing valve cavity, less fouling phenomenon.
    πŸ—οΈ
    Single-seal design with an ash hopper in the lower valve body prevents dust accumulation inside the valve.
    β˜…
    Enhanced Feature: Higher adaptability for relatively poor flowability, making it less prone to clogging.

    Principle of Operation

    Pneumatic actuator drives plates via pivot axis and swing arm. Spring is added between the disc and seat to ensure they always touch tightly, meanwhile enable discs to move gently. Such design could compensate for thermal expansion and contraction of the valve parts, and can overcome any influence of fluctuating back pressure on the seal and prevent particulate medium entering sealing surfaces. Similar to Double-Disc Gate Value, in the process of opening and closing, valve plates could self-rotate, as a result sealing surfaces could be grinded, and polished. Additionally, eddy current would be produced due to inlet/outlet channel is off centering to valve body, which would clean the valve cavity automatically. All these characteristics contributes the superior long life time of valve, providing a reliable guarantee for your system.

    The single-seal design, combined with an integrated ash hopper in the lower valve body, effectively prevents dust buildup, ensuring clean operation.
    Rotary Disc Wear-resistance Valve (RDV) DRC Type (1)
    Rotary Disc Wear-resistance Valve (RDV) DRC Type (2)
    Rotary Disc Wear-resistance Valve (RDV) DRC Type (3)
    Rotary Disc Wear-resistance Valve (RDV) DRC Type (4)

    Product Parameters

    Parameter Value
    Nominal Diameter DN65, DN80, DN200
    Nominal Pressure 1.0 MPa
    Actuator Working Pressure 0.4 – 0.6 MPa
    Working Temperature ≀ 200℃ Β (High-temperature type ≀ 450℃)
    Applicable Media Fly ash, ash and slag, dry dust, solid particles, and other abrasive and corrosive materials

    Outline and Dimensions

    Rotary Disc Wear-resistance Valve (RDV) DRC Type Detail (1)Rotary Disc Wear-resistance Valve (RDV) DRC Type Detail (2)
    Power plants rely on consistent, uninterrupted ash handling, and Long Jin's pneumatic valves have been installed in dozens of coal-fired and biomass facilities across China. However, every plant has unique boiler output, ash characteristics, and conveying line layouts. A valve that performs well in a low-velocity system may fail prematurely in a high-velocity dilute phase setup. To help you avoid costly trial and error, we encourage you to complete the inquiry form with as much detail as possible about your ash handling conditions. Please include your ash type (fly ash, bottom ash, or mixed), moisture content, temperature range, conveying phase (dense or dilute), and current valve failure modes if you are replacing an existing product. If available, share your system's air-to-material ratio and pipe diameter. Our specialists will cross-reference your data with our past project database and propose a valve model that balances wear resistance, sealing reliability, and lifecycle cost. Don't let another valve fail mid-cycleβ€”let us engineer one that lasts. Fill out the form below to start the conversation.

    Frequently Asked Questions

    • Q What is the Rotary Disc Wear-resistance Valve (RDV) DRC Type used for?
      The RDV DRC Type is primarily designed for fly ash handling systems in thermal power plants, serving as inlet valves, outlet valves, vent valves, exhaust valves, pipeline switching valves, and discharging valves. It is also widely applied in mining, paper, chemical, and pharmaceutical industries for conveying dry dust, dust-air mixtures, and other abrasive media.
    • Q How does the RDV DRC Type handle materials with poor flowability?
      The DRC Type features an enhanced design that offers higher adaptability for materials with relatively poor flowability, such as limestone with water absorption or dry/semi-dry desulfurization ash. The maintenance handholes also allow operators to perform regular inspections and clear any blockages quickly, minimizing downtime.
    • Q What is the maximum working temperature for this valve?
      The standard version of the RDV DRC Type supports working temperatures up to 200℃. For high-temperature applications, a specialized high-temperature type is available that can withstand temperatures up to 450℃, making it suitable for demanding thermal environments in power generation facilities.
    • Q How does the self-cleaning mechanism work in this valve?
      The inlet/outlet channel is off-center relative to the valve body, which generates an eddy current effect that automatically cleans the valve cavity during operation. Additionally, compressed air automatically blows through the valve cavity with no barrier at the inlet/outlet ports, further reducing fouling and keeping the valve clean without manual intervention.
    • Q Can the seals be replaced, and how does this affect maintenance costs?
      Yes, the seals on the RDV DRC Type are fully replaceable. This design significantly reduces maintenance costs because operators do not need to replace the entire valve when seals wear out. Combined with the maintenance handholes for easy access, the valve is engineered for cost-effective long-term operation in continuous industrial environments.
    • Q What actuator working pressure is required to operate this valve?
      The pneumatic actuator for the RDV DRC Type requires a working pressure in the range of 0.4 to 0.6 MPa. The actuator's piston rod is isolated from direct contact with the media, which protects the actuator from abrasive wear and significantly extends its service life in harsh dust-conveying environments.

    Make an Free Consultant

    Your Name*

    Phone Number

    Country

    Remarks*

    reset