China KD KC Silo Bottom and Side Unloader Factory - Powder Discharge Equipment Suppliers
Detail Image
Product Parameters
| Parameter | KC-100 | KC-150 | KD-100 | KD-150 |
| Discharge Port Diameter (mm) | 100 | 150 | 100 | 150 |
| Discharge Capacity (t/h) | 30–60 | 50–100 | 60–120 | 60–120 |
| Air Consumption (m³/h) | 0.8–1.2 (Cement) | |||
| Cylinder Working Pressure (MPa) | 0.24–0.58 | |||
| Air Inflation Box Working Pressure (MPa) | 0.1–0.2 | |||
| Air Inflation Rod Air Pressure (MPa) | 0.1–0.2 | |||
| Model | d1 | d2 | d3 | n-d | A | T |
| KC100 | 100 | 180 | 220 | 4-Φ18 | 765 | G3/4" |
| KC150 | 150 | 230 | 280 | 8-Φ18 | 955 | G1" |
| Model | A | B | C | G | E | F | D1 | D2 | n-d |
| KD100 | 1030 | 539 | 190 | 1553 | 510 | 450 | 170 | 100 | 4-Φ18 |
| KD150 | 1230 | 554 | 260 | 1829 | 595 | 450 | 225 | 150 | 8-Φ18 |
💡
Long Jin's wear-resistant ceramic valves have proven their durability in some of the most challenging pneumatic conveying environments, including high-temperature ash handling in power plants and abrasive material transfer in metallurgical facilities. However, we also understand that no two conveying systems are exactly alike. The specific combination of particle size, conveying velocity, pressure differential, and pipe routing can significantly impact valve performance and service life. That's why we don't believe in one-size-fits-all solutions.
To help us recommend the most suitable ceramic valve configuration for your unique application, please take a moment to complete the inquiry form below. Share with us details such as your conveying medium, operating temperature, expected cycles per day, and any past wear issues you've encountered. Once received, our application engineers will review your parameters and respond with a tailored proposal, including valve sizing, material grade suggestions, and estimated service intervals. Your operational challenges deserve a precise answer—not a generic catalog page.
To help us recommend the most suitable ceramic valve configuration for your unique application, please take a moment to complete the inquiry form below. Share with us details such as your conveying medium, operating temperature, expected cycles per day, and any past wear issues you've encountered. Once received, our application engineers will review your parameters and respond with a tailored proposal, including valve sizing, material grade suggestions, and estimated service intervals. Your operational challenges deserve a precise answer—not a generic catalog page.
❓ Frequently Asked Questions
🔹
What is the difference between the KC and KD silo unloader models?
The KC series is a side unloader designed for lateral discharge from the silo wall, while the KD series is a bottom unloader installed at the silo cone base. Both are available in 100mm and 150mm discharge port sizes, but the KD models generally offer higher discharge capacities (60–120 t/h) compared to KC models (30–100 t/h depending on size).
🔹
What materials are compatible with the KD/KC silo unloaders?
These unloaders are primarily designed for dry bulk powders and granular materials such as cement, fly ash, lime powder, and similar pneumatic conveying media. The air consumption specification references cement as a standard benchmark. Please consult our engineers for other abrasive or high-temperature materials.
🔹
What air pressure is required to operate the KC/KD unloaders?
The cylinder working pressure ranges from 0.24 to 0.58 MPa, while the air inflation box and air inflation rod both operate at 0.1 to 0.2 MPa. Ensure your compressed air supply system meets these requirements before installation to guarantee proper and consistent operation.
🔹
How do I select the correct model size for my application?
Model selection depends on your required discharge capacity, silo diameter, material characteristics, and pipe connection dimensions. For KC models, key dimensions include d1, d2, d3, and overall length A. For KD models, parameters A through G and flange dimensions D1/D2 are critical. We recommend submitting your system specifications via the inquiry form for a precise recommendation.
🔹
Can these unloaders handle high-temperature or highly abrasive environments?
Yes. Long Jin's ceramic valve technology incorporated in these unloaders has been validated in demanding environments such as high-temperature ash handling in power plants and abrasive material transfer in metallurgical facilities. For extreme conditions, our engineers can recommend specific ceramic material grades and valve configurations to maximize service life.
🔹
How can I get a customized solution for my conveying system?
Since every pneumatic conveying system has unique requirements, we offer tailored proposals based on your specific parameters. Please fill in the inquiry form with details including conveying medium, operating temperature, expected cycles per day, particle size, and any previous wear issues. Our application engineers will respond with valve sizing recommendations, material grade suggestions, and estimated service intervals.



