China Gasification Equipment Suppliers - Efficient Solutions for Smooth Material Flow in Factories
Characteristics
Tank is formed via compression molding process, guaranteeing not only beautiful appearance but no leak from body and junctions. Pre assemble, shaping adjustment process eliminates all welding deformation and stress, ensuring its bottom surface and flange connecting surface smooth and straight; The porous plate is a kind of high-strength gasification board designed for the power plant dry ash bank.
Detail Image
Product Parameters
| Parameter | Value |
| Material | SiC |
| Compressive Strength | 67.7 MPa |
| Bending Strength | 27.3 MPa |
| Density | 2.22 g/m³ |
| Permeability | 0.8 m³/m².min |
| Porosity | 37.9% |
| Gas Consumption | 0.17 Nm³/min |
| Temperature Tolerance | >400℃ |
| No. | Name | Type | Spec. (Width × Len × Thick) |
| 1 | Gasification Rectangular Plate | QHB150 | 150 × 300 × 25 |
| QHB175 | 175 × 305 × 25 | ||
| QHB200 | 200 × 305 × 28 | ||
| QHB250 | 250 × 310 × 30 | ||
| 2 | Gasification Round Plate | YQHB150 | φ 150 × 25 |
| YQHB175 | φ 175 × 25 | ||
| YQHB200 | φ 250 × 28 | ||
| YQHB250 | φ 250 × 30 | ||
| 3 | Gasification Groove | QHC150 | — |
| QHC175 | — | ||
| QHC200 | — | ||
| QHC250 | — |
Could be Customized
Gasification Groove
- Gasification grooves for flat bottom ash silo are arranged uniformly on the bottom.
- Tilt angle from ash silo edge to the discharge port no less than 6°.
- Layout area no less than 15% of area of the silo bottom.
- Gasification air per square meter of groove is 0.62 Nm³/min.m².
- Distance between two discharge holes should be no less than 1.8M; two chutes should be placed towards discharge holes along opposite slope.
- Air pressure of ash side of gasification groove preferably no more than 80 KPA.
- Air from each intake port should remain stable; each branch intake pipe should be equipped with automatic flow control valve.
- Manhole should be set near the bottom of the silo.
Gasification Plate
- Gasification plate generally set at cone bottom ash silo, hopper bottom. Generally close to the discharge port disposed at 2 plates, and 4 placed at the bottom of the cone.
Frequently Asked Questions
-
Q What material is the gasification groove / plate made from?The gasification groove and plate are manufactured from high-strength Silicon Carbide (SiC), which provides excellent compressive strength (67.7 MPa), superior temperature tolerance above 400℃, and long-term durability in dry ash handling environments.
-
Q How is the tank body formed, and how is leak prevention ensured?The tank is formed via a compression molding process. A pre-assembly and shaping adjustment procedure eliminates welding deformation and stress, ensuring the bottom surface and flange connecting surface remain smooth and straight — effectively preventing any leaks from the body or junctions.
-
Q What are the standard specifications available for the gasification plates and grooves?Standard rectangular plates range from QHB150 (150×300×25 mm) to QHB250 (250×310×30 mm). Round plates range from YQHB150 (φ150×25 mm) to YQHB250 (φ250×30 mm). Gasification grooves are available in types QHC150, QHC175, QHC200, and QHC250. Custom sizes can also be manufactured upon request.
-
Q What are the key installation requirements for gasification grooves in a flat bottom ash silo?Gasification grooves should be arranged uniformly on the silo bottom, with a tilt angle of no less than 6° from the silo edge to the discharge port. The layout area must cover at least 15% of the silo bottom area. The distance between two discharge holes should be no less than 1.8 m, and each branch intake pipe must be fitted with an automatic flow control valve.
-
Q What is the recommended air pressure and gas consumption for the gasification groove?The air pressure on the ash side of the gasification groove should preferably not exceed 80 KPA. The gasification air supply per square meter of groove is 0.62 Nm³/min.m², and the overall gas consumption is rated at 0.17 Nm³/min to ensure stable and efficient fluidization performance.
-
Q Can the gasification plates and grooves be customized for special project requirements?Yes. Both gasification plates and grooves can be customized to meet specific project dimensions and performance requirements. Please contact us with your technical specifications, including required size, permeability, and operating conditions, and our engineering team will provide a tailored solution.


