Leave Your Message

China DMC Type Bag Filter - Efficient Dust Collection System from Leading Suppliers and Factory

The DMC pulse bag filter is expertly designed to efficiently filter dust-laden gases, making it an ideal choice for various powder handling applications. This advanced filtering system is suitable for installation atop a range of powder banks, When selecting the right product type, it is crucial to consider the entrance dust concentration. The airflow rate passing through the filter bag, also known as the filtration velocity, is inversely related to the concentration of dust and gas. To ensure optimal performance, it is essential to calculate the filtration area based on the dust collecting capacity, which is typically not to exceed 400 g/m². You can determine the dust collecting ability using the following formula: C = G * V * T, Where:, - C: dust collecting ability, - G: inlet dust concentration, - V: filtration velocity, - T: cleaning interval, If calculations indicate that the required dust collection exceeds the established ability, adjustments to the filtration velocity and filter area are necessary to enhance efficiency. As a leading manufacturer in China, we take pride in delivering high-quality DMC pulse bag filters, trusted by suppliers worldwide for their reliability in dust management solutions

    Detail Image

    DMC Type Bag Filter (1)
    DMC Type Bag Filter (1)
    DMC Type Bag Filter (2)
    DMC Type Bag Filter (2)
    DMC Type Bag Filter (3)
    DMC Type Bag Filter (3)
    DMC Type Bag Filter (4)
    DMC Type Bag Filter (4)

    Outline and Dimensions

    Code name A B C D H G J L M N I L1 K K1 N-d N1-d1
    DMC24 1410 1450 360 470 2575 3/4" 440 339 1200 370 400 620 110 113 14-Φ11 24-Φ18
    DMC36 1360 1400 755 466 2575 3/4" 441 339 1000 366 400 800 147 113 12-Φ11 24-Φ18
    DMC48 1760 1800 955 890 2575 1 840 339 1200 370 800 1020 110 113 20-Φ10 32-Φ18
    DMC60 2160 2250 1200 866 2600 1 836 336 2000 366 800 1250 120 120 20-Φ11 36-Φ18
    DMC72 2614 2650 1400 870 2600 1 840 339 2400 370 800 1390 120 113 20-Φ11 40-Φ18
    DMC84 3014 3050 1600 1270 2600 1 1240 339 2800 370 1200 1590 120 113 26-Φ11 44-Φ18
    DMC96 3410 3450 1835 1270 2600 1 1240 339 3200 370 1200 1755 124 113 26-Φ11 48-Φ18
    DMC108 3850 3900 2035 1450 2600 1 1400 339 3600 370 1360 120 113 34-Φ11 52-Φ18
    DMC120 4260 4300 2225 1450 2600 1 1240 336 4000 370 1200 124 113 26-Φ11 56-Φ18
    Technical parameters model DMC-24 DMC-36 DMC-48 DMC-60 DMC-72 DMC-84 DMC-96 DMC-108 DMC-120
    Area (m²) 18 27 36 45 54 63 72 81 90
    No. of Bags 24 36 48 6 72 84 96 108 120
    Bag Size Φ120×2000
    Temp (℃) <120
    Pressure (Pa) 1000~1500
    Performance 99%
    Dust Concentration <15 (g/m³)
    Filtration Velocity (m/min) 0.5~4
    Air Flow (m³/h) 540~
    4300
    810~
    6480
    1080~
    8640
    1350~
    10800
    1620~
    12900
    1890~
    15100
    2160~
    17200
    2430~
    19400
    2700~
    21600
    Blow Pressure (Mpa) 0.5~0.7
    No. of Meg. Valve (unit) 4 6 8 10 12 14 16 18 20
    Plus Length (m) 0.1~0.2
    Period (s) 60~120
    Interval (s) 1~50
    ⚙️ Power plants rely on consistent, uninterrupted ash handling, and Long Jin's pneumatic valves have been installed in dozens of coal-fired and biomass facilities across China. However, every plant has unique boiler output, ash characteristics, and conveying line layouts. A valve that performs well in a low-velocity system may fail prematurely in a high-velocity dilute phase setup. To help you avoid costly trial and error, we encourage you to complete the inquiry form with as much detail as possible about your ash handling conditions. Please include your ash type (fly ash, bottom ash, or mixed), moisture content, temperature range, conveying phase (dense or dilute), and current valve failure modes if you are replacing an existing product. If available, share your system's air-to-material ratio and pipe diameter. Our specialists will cross-reference your data with our past project database and propose a valve model that balances wear resistance, sealing reliability, and lifecycle cost. Don't let another valve fail mid-cycle—let us engineer one that lasts. Fill out the form below to start the conversation.
    Frequently Asked Questions
    What is a DMC Type Bag Filter and how does it work?
    A DMC Type Bag Filter is a pulse-jet dust collector that uses compressed air bursts to clean cylindrical filter bags. Dust-laden air enters the filter chamber, passes through the filter bags, and clean air exits through the outlet. Periodically, a short pulse of compressed air is injected into each bag to dislodge accumulated dust, which falls into the hopper below for collection.
    What filtration efficiency does the DMC Bag Filter achieve?
    The DMC Type Bag Filter achieves a filtration performance of up to 99%, with outlet dust concentration maintained below 15 g/m³. This makes it suitable for applications in power plants, cement factories, metallurgy, and other industries with strict emission control requirements.
    What is the maximum operating temperature for the DMC Bag Filter?
    The standard DMC Type Bag Filter is designed for operating temperatures below 120°C. For higher-temperature applications, please consult our engineering team, as customized solutions with heat-resistant filter media and structural modifications may be available.
    How do I select the right DMC model for my application?
    Model selection depends on several factors including required filtration area (m²), airflow volume (m³/h), dust type and concentration, operating temperature, and available compressed air pressure. Refer to the technical parameters table above to match your airflow requirements to the appropriate DMC model (DMC-24 through DMC-120). Our specialists can also assist with custom sizing based on your specific process conditions.
    What compressed air pressure is required to operate the pulse-jet cleaning system?
    The DMC Bag Filter's pulse-jet cleaning system requires a compressed air (blow) pressure of 0.5 to 0.7 MPa. The pulse length is set between 0.1 and 0.2 seconds, with a cleaning period of 60 to 120 seconds and an interval of 1 to 50 seconds, all adjustable based on dust load and system requirements.
    Can the DMC Bag Filter handle both fly ash and bottom ash applications?
    Yes, the DMC Type Bag Filter can be configured for both fly ash and bottom ash handling depending on the model and auxiliary equipment selected. When submitting an inquiry, please specify your ash type, moisture content, particle size distribution, and conveying phase (dense or dilute) so our engineers can recommend the most suitable configuration and filter media for your application.

    Make an Free Consultant

    Your Name*

    Phone Number

    Country

    Remarks*

    reset